- Mobile design follows user
- Inertia and cam locking systems for safety
- 310 lb Capacity
- For use with 5/8" (16 mm) diameter polyester/polypropylene blend rope lifeline
- Made of high grade corrosion resistant materials
- Utilize a cam lever as well as a friction sensitive brake to lock the rope grab onto the lifeline in case of a fall, even if the operator holds the device open in a panic situation
- Tensile Strength of 5,000 lb.
- Vertical rope lifeline rope grabs slip onto rope lifelines to allow the worker to move up and down the rope
- When exposed to a fall force, the rope grab locks into place to prevent the worker from falling
- Reduces the arresting forces on a worker if there is a fall
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.